Amprobe ACD-10 Plus Digital Clamp Meter
$28.04
$48.51
The Amprobe ACD-10 PLUS clamp multimeter has thinner jaws than standard digital clamp multimeters (only 0.4″/10mm thick) allowing access to tight measurement areas and still handles conductors up to 1.0 (25mm).It combines the convenience and flexibility of an AC/DC current clamp meter with the most frequently used digital multimeter functions, including ac/dc current and voltage, capacitance, and frequency.Features:Measures AC and DC voltage to 600V and AC current to 600A to handle residential/commercial and small industrial applicationsThin jaws, only 10mm (0.4″) thick make it easier to maneuver between tightly packed conductorsMeasures frequency, resistance, and capacitanceFeatures continuity beeper to quickly find opens and shortsAccommodates conductors up to 1.0″ (25mm) in diameterAuto ranging saves time by instantly selecting correct rangeAuto power off to conserve battery lifeRubber over-molded case absorbs shockIncludes test leads, battery (installed), soft carrying pouch, and users manualSpecification:AC Voltage4.000 V, 40.00 V, 400.0 V, 600 VDC Voltage400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 VAC Current40.00 A, 400.0 A, 600 AResistance400.0 µΩ, 4.000 Ω, 40.00 Ω, 400.0 Ω, 4.000 MΩ, 40.00 MΩCapacitance500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µFFrequency40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leadsAccommodates conductorsup to 1.0″ (25 mm) in diameter Display:3-3/4 digits 4000 counts LCD displayUpdate rate:3 per second nominalPolarity:AutomaticOperating temperature:°C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °CAltitude:Operating below 2000m; Indoor useStorage temperature:-20 °C to 60 °C, < 80% RH (with battery removed)Temperature coefficient:nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)Low battery:Below approx. 2.4VPower supply:3V coin battery IEC-CR2032Power consumption:2.8 mA typical except that 3.3 mA typical for ACA functionAPO timing:Idle for 30 minutesAPO consumption:5 µA typicalJaw opening conductor diameter:max 26 mmSpecial features:30ms Max Hold; Data Hold; Relative Zero mode
Electrical Tester & Meter