Osmo One Coat Only HS Plus

Description Osmo One Coat Only HS Plus is a transparent, matt/satin wood stain, based on natural oils for wood in outdoor areas. Due to its high oil content, only one coat is required making your wood treatment quick and easy. It is ideal for the protection of all wood in outdoor areas, including carports, timber cladding, balconies, fences, pergolas, garden furniture, childrens exterior play sets and garden sheds. This micro-porous surface allows the wood to breathe and reduces swelling and shrinkage. Osmo One Coat Only HS Plus is water-repellent, extremely weatherproof and UV-stable. It does not crack, peel, flake or blister. No sanding necessary for future applications, just simply re-coat with easy and seamless application. The wood stain stays workable while coating. Due to its low content of solvents, it works without any biocides or preservatives, has a high content of solids, so it offers high coverage. Even with a very thin coat, an optimal surface protection is achieved. The dry wood stain is safe for humans, animals and plants. How to use Osmo One Coat Only HS Plus Osmo One Coat Only HS Plus Colours Please Note Health and Safety Safety Data Sheets How to use Osmo One Coat Only HS Plus The wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo One Coat Only HS Plus is ready to use. Do not thin. Stir well before use. Clean old micro-porous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear a dust mask while sanding. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. With an Osmo Flat Brush or Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approximately 12 hours under good ventilation. Osmo One Coat Only HS Plus Colours 9203 Basalt Grey 9205 Patina9206 Light Oak9207 Quartz Grey9211 White Spruce9212 Silver Poplar9221 Pine 9235 Red Cedar9236 Larch9241 Oak9261 Walnut9262 Teak9264 Rosewood9271 Ebony Please note  Please note that these wood oils are custom mixed in house at Priory Polishes using our Osmo tinting machine. We mix the wood oil on site to your colour specification which means we can offer our fast delivery and a full array of colours not available in many other stores. As these wood oils are tinted to order they cannot be cancelled, are non-returnable and non-refundable. Storage: 5 years and longer if stored in the closed original can. If thickened by frost, store at room temperature for 24 hours prior to use. Cleaning of tools: With Osmo Brush Cleaner (free of aromatic compounds). Drying time: Approx. 12 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times. After 2-3 weeks, the surface is fully cured. Coverage: Product coverage for 1 coat is 26 m²/1 l. It depends significantly on the character of the wood. All information refers to smooth and planed/cut surfaces. Other surfaces may lead to deviations in coverage. Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. When applied too generously, glossy spots may appear. With time, these glossy spots will weather automatically into an even satin look. Light transparent colour tones offer only limited UV protection (greying and fading through sunlight); therefore they are not recommended for surfaces exposed to strong sunlight. Many wood species contain water soluble coloured extractives which may leach out naturally when weathered. Questions and Answers We have previously used OSMO HS Plus (Oak) on the windows, soffits etc which is now very faded and needs re-oiling. Can we now coat the existing with a different shade, say Patina? or stick with the same shade? Unless you are sanding back to the bare wood, it is always advisable to stick to the same colour. This is to stop any patchiness or variation in shades. Customer Examples: One Coat Only used on OutbuildingHome painted in HS One Coat Health and safety Osmo One Coat Only HS Plus is Based on natural plant oil (sunflower oil), iron oxide and organic pigments, titanium dioxide white pigment, siccatives (drying agents) and additives. Dearomatized white spirit (benzene-free). EU limit value for this product (cat. A/e): 400 g/l VOC (2010). This product contains max. 400 g/l VOC. Keep out of reach of children. Do not get in eyes, on skin, or on clothing. If medical advice is needed, have product container or label at hand. Use only outdoors or in a well-ventilated area. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Warning: Wash out any used cloth impregnated with this product immediately after use or store in an airtight container (danger of selfignition). The dried finish is classified as B2 (normal flammability) according to DIN 4102 regulations. Safety Data Sheets Product Information Safety Data